EMF shielding men’s underwear is one of the most recent technologies and innovations in the combination of natural and man-made yarns metalized with Silver. The fabricated clothing not only has the EMF shielding property but also has other features including antibacterial, anti-fungal and anti-odor behavior. Sperm has been damaged by electromagnetic radiation, which has side effects on pregnancy.
Results of scientific researches have shown the effect of EMF pollution on the number, movement, quality, and morphology of sperms. Therefore, it is recommended that men should be used these products two or three months before any intention for childbearing b in order to maintain sperm quality.
Wash the clothes with hand in a slow manner. The cotton yarn is sensitive to water pollution and can be damaged.
Water which is used to wash is required to be free from salt and chlorine, and it is better to use water purified, refined water or mineral water.
The sweat of the body can also reduce the life of silver, so if you are sweating very much, it’s better to wash your clothes to be free of sweat.
Use non-acidic detergents such as gentle, non-bleaching shampoos, such as baby shampoos.
Washing temperature: below 40 ° C.
Do not use a laundry
Do not squeeze the clothes
Do not place under the sunlight for long periods of time
Do not use a hot iron
It should be noted that the clothes may turn shorter several times after the initial washing can be caused. This dehydration is normal and there is no change in the efficiency of clothing, so the length of clothing is considered a few centimeters increased
Easy to apply
water-based paint for walls, ceilings, doors, and other interior or exterior surfaces
Very effective for blocking cell phone signals, CB, TV, AM, FM signals, radiofrequency radiation, and microwaves.
Based on a high-quality pure acrylic binder, this shielding paint offers a perfect compromise of excellent attenuation and good ecology
Reduction efficiency around 99% of HF-Radiation with only one layer.
Cover with latex paint, wallpaper, etc. to achieve desired aesthetics
Attenuation: typically 30 dB per layer
Resistivity: ~10 Ohm per sq
Minimum application temperature: +1°C / 33.8°F
Weight: 3.2 lb /liter
Typical coverage: 50-100 ft² (~ 5-10 m²) per liter
Shelf Life: 15 months, unopened
RoHS CompliantVOC content 0,2 g/l
Low cost in comparison with the same foreign type
Shielding efficiency is based on the absorption mechanism